Tips and Hacks to Keep Your Inverter Battery Last Longer

 

Frequent power outages can be quite frustrating. In such conditions, performing your daily errands at home or the workplace may take longer hours. Imagine running the mixer grinder, and suddenly, a power cut occurs. In such a disturbing situation, you wait for hours only to cook the dish or prepare it later.

This might also disrupt your regular office routine. Experiencing a complete system shutdown not only stops the work but also delays it. As a result, your employee either waits for hours to complete the work. This further hampers their productivity.

So, as a responsible home or office owner, investing in a good battery is your key duty. If you plan to buy a tubular inverter battery, the following are the maintenance tips and hacks. Let's learn how to keep your tubular inverter batteries last longer.

Appropriate Installation is the Key to Keep it Long-Lasting

Installation is the foundation point from which issues may begin. If your inverter is installed incorrectly, future issues may arise. Since then, the battery's durability has been questioned. So, keep the battery in a well-ventilated area.

Note that it should be free from direct heat and sunlight. That way, you can reduce the temperature that would otherwise result in internal damage. Always rely on a proficient expert for the Installation. 

Maintain Proper DOD or Depth of Discharge 

Now, what do you mean by DOD? Simply put, it refers to the percentage of the battery's capacity used during the discharge cycle. You must always aim to avoid draining the battery below 50% of its capacity.

Notably, deep discharge may create excessive stress inside the battery's internal system and shorten its longevity. So, you must always monitor the inverter's battery level indicator and recharge as soon as it reaches 50%.

Avoid Overcharging

Did you know both undercharging and overcharging may cause damage to the battery? So, it's a great practice to check your charger's settings and ensure it is compatible with the tubular battery's model.

You can contact a professional or read the manual to understand more about currents and voltages. Even if the battery isn't in use, you should keep it connected to the charger for a longer lifespan.

Think of the Temperature

Extreme temperatures (cold or hot) may impact the lifespan of your battery. So, your job is to store the inverter battery in a well-ventilated place. Ensure the area is dry and cold, with an ambient temperature between 20 and 25 degrees Celsius. It should be stored away from direct sunlight.

Keep it Clean

Dirt and dust accumulation on your battery terminals may hinder conductivity and result in corrosion. So, you must give importance to periodic cleaning. Use a water solution and baking soda for the purpose.

When done, use clean water to rinse it thoroughly and dry it. Never keep them connected to the battery while cleaning those terminals. This may result in electrical hazards. Disconnect it before cleaning the terminals; otherwise, you may experience electrical shocks.

Regular Visual Inspection

Have you checked for noticeable signs of damage on your battery, such as bulges, leaks, or cracks? Such indications may result in internal issues, which require immediate professional attention. So, always keep an eye on your battery. A visual inspection may help catch issues earlier and prevent more significant electrical hazards in the future. 

A Few Good Maintenance Hacks

Run your inverter battery more confidently at home or the workplace by keeping the following hacks in mind:

• Check Water Levels 

Compared to car batteries,tubular batteries use a liquid electrolyte solution to function. The water evaporates naturally over time. So, it's imperative to check the water levels of your battery cells. 

You can use distilled water to top up because other types of water may contain minerals that harm the internal components. It's best to use distilled water as it's pure and clean. Undermining the watering routine may result in reduced battery capacity and shorter lifespan. 

• Terminals and Cables

The battery cables and terminals keep the inverter running seamlessly. However, a minor issue in the connection may result in wear and tear in the future. Regular inspection of the cables and terminals is effective for signs of damage and corrosion. 

One quick note: A white or greenish buildup indicates corrosion, while cracks, loose connections, and cuts suggest damaged cables. They can pose electricity hazards and hinder conductivity.  

As soon as you notice such issues, you must clean the corrosion using baking soda or replace the damaged parts. 

Wrapping up

Your inverter battery is a significant element of the backup power system. Following the above steps ensures the tubular battery remains functional for years. Always remember that a well-maintained battery offers long-lasting performance and ensures optimal safety. So, if you plan to buy an inverter in Lagos, please follow these tips and hacks to maintain your battery and maximise its lifespan.