8 Simple Steps to Maximise the Lifespan of Your Tubular Inverter Batteries

Tubular inverterbatteries are in wide use to store electrical energy for backup power during power cuts. These batteries are highly popular for their durability and longer lifespan compared to other types. However, like any other battery, proper care and maintenance are essential to maximize their lifespan and ensure optimal performance of the power backup tools.

The blog will focus on the simplest yet effective tips to help you extend the lifespan of your tubular inverter batteries.

Ensure Proper Installation:

Proper installation plays a significant role to maximise the lifespan of tubular inverter batteries. Excessive heat can affect even the long-lasting tubular batteries significantly. While installing a tubular inverter battery, always make sure to place it in a cool, well-ventilated area. Excessive heat can significantly reduce the battery's lifespan. Also ensure the battery is positioned on a stable surface to prevent any accidental damage.

Regular Inspection and Cleaning:

You should regularly inspect and clean the battery terminals to maintain good electrical conductivity. Corrosion on the terminals can lead to poor performance and reduced lifespan. You can also apply a mixture of baking soda and water to clean the terminals with a soft brush. After cleaning, dry the terminals thoroughly before reconnecting them.

Avoid Deep Discharging:

Deep discharging occurs when you drain the battery to extremely low levels on a regular basis. The practice can lead to sulfation, a condition where sulfate crystals build up on the battery plates, reducing efficiency. Tubular inverter batteries are known for their deep cycling capabilities, yet it is advisable not to drain the battery to extreme levels. To avoid deep discharging, keep an eye on your inverter's battery status and recharge it before it reaches the most critical level.

Regularly Charge Your Battery :

Regular charging is essential to maintain the capacity and performance of your tubular inverter battery. Ensure that you charge the battery fully after each use or discharge cycle. Leaving the battery in a partially charged state for an extended period can cause sulfation and shorten its lifespan. Consider investing in a good-quality automatic battery charger to avoid overcharging or undercharging.

Avoid Overloading:

Be mindful of the electrical load you connect to your inverter system. Overloading can strain the battery, leading to reduced efficiency and a shorter lifespan. Make sure to calculate the power requirements of your appliances and electronics before connecting them to the inverter. If necessary, use a higher-capacity battery or distribute the load across multiple batteries.

Perform Regular Maintenance Practices:

Perform routine maintenance on your tubular inverter battery to keep it in good condition. Regularly examine the water levels in the battery cells regularly and add distilled water if necessary. Maintain the water levels within the recommended range as per the indications. Also, keep an eye out for any signs of leakage or physical damage and address them promptly.

Protection from Extreme Temperatures:

Whether hot or cold, extreme temperatures can adversely affect the performance and lifespan of tubular inverter batteries. Protect your inverter battery from exposure to direct sunlight, high ambient temperatures, or freezing conditions. If possible, install the battery in a temperature-controlled environment or provide additional insulation to minimize temperature fluctuations.

Ensure Proper Storage:

If you need to store your tubular inverter battery for an extended period, follow the manufacturer's guidelines for storage. Fully charge the battery before storage and disconnect it from the inverter. Store the battery in a cool, dry place in a moderate temperature to avoid damage from extreme temperatures or humidity.

Wrapping It Up:

By following these simple tips, you can easily extend the lifespan of your tubular inverter batteries. Proper installation, regular cleaning, avoiding deep discharging, regular charging, load management, routine maintenance, temperature protection, and proper storage are key factors in ensuring optimal battery performance and longevity. Consider Star Plus tubular inverter batteries for their efficient performance and long-lasting service life. 

 

How to Get the Most from Your Star Plus Inverter Battery

 

Inverters have become the most crucial part of everyday life. Ever thought of spending your holiday without power? If that is the case, how about spending a workday without power? Those would be a nightmare. The digital world has made us more reliant on power and its urbanity. The battery manufacturers in Nigeria have made reliable power easier to access and affordable. The next noteworthy subject is getting the most from your inverter battery. This article covers the key tips that are not commonly known. Please read the article to make the most of your money spent.

 

Maintenance tips for inverter batteries:

Proper maintenance: 

Regular maintenance ensures the battery's longevity, and it is always best to check the health of the battery when it is fully charged. You should perform the examination when the battery is connected for at least 10-15 hours for charging.

A healthy battery should have a voltage reading close to its maximum voltage rating; thus, checking the voltage reading is vital.

We often confront the wear and tear problem that impacts the battery's life. Thus, it's good to inspect for any signs of wear and tear, such as corrosion or damage to the terminals. If any potential issue is found, you can decide it is time to replace the battery.

However, you must observe the battery's performance and see how long the battery holds its charge. If you find that it is not holding the charge as long as it should be, then probably, it's time to replace the battery. 

Frequent checks on the battery's health help in catching potential issues early and ensure performance optimally. If you are all set to buy an inverter in Lagos, look for their post-installment policies and how they assist with the maintenance and charges for the maintenance services. Very few people pay attention to the maintenance of these batteries. However, maintenance after their installment ensures the optimal functioning of batteries and helps cut down operating costs over time.

Clean the battery terminals regularly:

Inverter batteries excrete lead sulfate during their operation, and lead sulfate gets deposited on their terminals, which reduces the electrical conductivity of the inverter. If the condition prolongs, the battery becomes less efficient over time. Thus, the terminals have to be cleaned properly with warm water and a nylon brush.

Check the acid level regularly:

Batteries have two major components, lead, and acid. The float indicators of the battery depict the acid level inside the batteries and ensure the proper functioning of the inverters. The color of the acid also indicates the health of the inverter. If the acid comes out colorless after opening the vent, it is a good indication. 

Checking the acid level is crucial to maintain optimal performance, as the batteries rely on the acid to convert the stored energy to usable electric power. If the acid present in the batteries is not sufficient for the conversion or presents more than required, the batteries' ability to perform optimally is compromised.

A lower acid level means the lead plates are exposed to air, and that causes damage. Prolonged exposure to air leads the batteries to lose their capability to hold the charge or even fail. 

Battery Companies in Nigeria offer detailed manual and post-installment customer service to ensure these factors are checked thoroughly. Therefore taking their assistance enables you to operate the inverter batteries optimally. 

 

Power crisis in Nigeria getting worse:

A recent update about the country states that about 62% of the citizens, about 120 million people, lacked access to electricity!

Wikipedia states that about 55% of the Nigerian population experience power supply difficulties, whereas in some regions, the power supply is nearly non-existent. It also states that power supply problems have crippled agricultural, industrial, and mining sectors to a greater extent. The government could not utilize varied forms of energy due to the unavailability of oil in Nigeria and reliance on the expansion of the fossil fuel-burning sector. 

On the other hand, the dependency on hydroelectricity doesn't seem practical as well, as it is dependent on the seasons for the required amount of water supply. 

Furthermore, Nigeria is a tropical country, so it receives a lot of insolation from the sun. Thus the government, through the "Rural electrification project," is composed to supply solar systems to about 5 million households. 

Despite being one of the largest oil producers in the world, the country faces acute power shortages, frequent blackouts, and load shedding. Therefore experts consider Inverter batteries are reliable and affordable options to deliver power to all Nigerians.

Moreover, the inverter battery users must prioritize maintenance and clean for the extended and optimal performance of the inverter battery system.

Conclusion:

Inverters are like any other electrical device; they are designed to use regularly. Regular usage helps prevent the majority of malfunctions and damage to the device. When the electrical connections between the batteries and inverters are intact, the electrical problems will be at bay, and the efficiency of the system is also enhanced. When you are all set to install an inverter battery to your requirement, follow these tips. 

 

Why Tubular Inverter Batteries are the Top Choice for Homeowners

 

Inverters and their batteries go hand in hand. In fact, batteries are at the heart of inverters. But many people, while they know they have to invest in an inverter of their choice, seem to be confused about the type of battery they would need. Particularly, homeowners who do not have the necessary experience in inverters seem to be at a loss when choosing the right type of batteries they would need.

In Nigeria, inverters are a necessary component of every household. Power outages are frequent and common, and for the same reason, there are multiple inverter battery types to choose from. For example, Flat plate, Gel, and Tubular inverter batteries are readily available in the market.

While each has its own purposes, a tubular battery is the best choice for home inverters for several reasons.

Types of Inverter Batteries
According to how they function, inverter batteries are of three major types.

Flat Plate: These are typical lead acid batteries with both the positive and the negative plates being flat. Though cheap, they do not last long and require constant maintenance.

Gel Battery: These types of inverter batteries are completely maintenance-free, and the fumes emitted are less poisonous than their flat plate counterpart. However, they are quite expensive.

Tubular Battery: These are the most popular type of inverter battery. They have wide usage across entire Nigeria and other parts of Africa and are done so due to the several benefits it has over the other types of batteries.

Benefits of Using Tubular Inverter Battery
Among the other types of inverter batteries, a tubular battery is the most popular type due to several reasons. They last longer and require little maintenance.

Tubular batteries are so named because their chemical compounds are sealed using polyester tubes. Despite their price, they are a very good buy because of the many benefits they provide.

Long Lasting
The tubular batteries are so designed that the polyester tubes used in them reduce the amount of shedding and corrosion of the plate inside them. So, in effect, they last for a long time. And a homeowner who buys a tubular inverter battery does not have to spend anything for a long time to come.

Functions at Extreme Temperatures
The tubes of a tubular inverter battery rest on the surface of the plates. This allows them to function at extreme temperatures without being harmed or their performance affected.
So, these batteries last long while being used. In long periods of power outages in a home or residential complex, they can be assured that their inverter battery will last without failing.

Low Maintenance
Tubular inverter batteries require a very low level of maintenance when compared to flat plate batteries. They are extremely stable; thus, you won’t have to check their electrolyte levels frequently, and as they require very little water, you won’t have to fill them up with water every now and then.

Heavy Duty
Heavy-duty power households that require a strong, uninterrupted power supply will benefit, in particular, by buying these batteries. Tubular batteries can handle high-cyclic equipment very efficiently and, thus, are quite the suited type of battery for the job.

HADI Casting
Tubular batteries use a special high-pressure casting method called HADI. This makes the battery even more durable and hardy. Due to this casting method used, these batteries last long even when used extensively and heavily.

Conclusion
A battery is an integral component of an inverter. In fact, an inverter is often sold along with a battery as a combo. So, you must know the types of batteries available and which one you should buy. A tubular battery is your best bargain due to many reasons, as mentioned above. If you live in Nigeria, you can always opt for a Star Plus tubular battery, manufactured on the home soil with the finest quality raw materials and cutting-edge technology to suit all your purposes.