8 Simple Steps to Maximise the Lifespan of Your Tubular Inverter Batteries

Tubular inverterbatteries are in wide use to store electrical energy for backup power during power cuts. These batteries are highly popular for their durability and longer lifespan compared to other types. However, like any other battery, proper care and maintenance are essential to maximize their lifespan and ensure optimal performance of the power backup tools.

The blog will focus on the simplest yet effective tips to help you extend the lifespan of your tubular inverter batteries.

Ensure Proper Installation:

Proper installation plays a significant role to maximise the lifespan of tubular inverter batteries. Excessive heat can affect even the long-lasting tubular batteries significantly. While installing a tubular inverter battery, always make sure to place it in a cool, well-ventilated area. Excessive heat can significantly reduce the battery's lifespan. Also ensure the battery is positioned on a stable surface to prevent any accidental damage.

Regular Inspection and Cleaning:

You should regularly inspect and clean the battery terminals to maintain good electrical conductivity. Corrosion on the terminals can lead to poor performance and reduced lifespan. You can also apply a mixture of baking soda and water to clean the terminals with a soft brush. After cleaning, dry the terminals thoroughly before reconnecting them.

Avoid Deep Discharging:

Deep discharging occurs when you drain the battery to extremely low levels on a regular basis. The practice can lead to sulfation, a condition where sulfate crystals build up on the battery plates, reducing efficiency. Tubular inverter batteries are known for their deep cycling capabilities, yet it is advisable not to drain the battery to extreme levels. To avoid deep discharging, keep an eye on your inverter's battery status and recharge it before it reaches the most critical level.

Regularly Charge Your Battery :

Regular charging is essential to maintain the capacity and performance of your tubular inverter battery. Ensure that you charge the battery fully after each use or discharge cycle. Leaving the battery in a partially charged state for an extended period can cause sulfation and shorten its lifespan. Consider investing in a good-quality automatic battery charger to avoid overcharging or undercharging.

Avoid Overloading:

Be mindful of the electrical load you connect to your inverter system. Overloading can strain the battery, leading to reduced efficiency and a shorter lifespan. Make sure to calculate the power requirements of your appliances and electronics before connecting them to the inverter. If necessary, use a higher-capacity battery or distribute the load across multiple batteries.

Perform Regular Maintenance Practices:

Perform routine maintenance on your tubular inverter battery to keep it in good condition. Regularly examine the water levels in the battery cells regularly and add distilled water if necessary. Maintain the water levels within the recommended range as per the indications. Also, keep an eye out for any signs of leakage or physical damage and address them promptly.

Protection from Extreme Temperatures:

Whether hot or cold, extreme temperatures can adversely affect the performance and lifespan of tubular inverter batteries. Protect your inverter battery from exposure to direct sunlight, high ambient temperatures, or freezing conditions. If possible, install the battery in a temperature-controlled environment or provide additional insulation to minimize temperature fluctuations.

Ensure Proper Storage:

If you need to store your tubular inverter battery for an extended period, follow the manufacturer's guidelines for storage. Fully charge the battery before storage and disconnect it from the inverter. Store the battery in a cool, dry place in a moderate temperature to avoid damage from extreme temperatures or humidity.

Wrapping It Up:

By following these simple tips, you can easily extend the lifespan of your tubular inverter batteries. Proper installation, regular cleaning, avoiding deep discharging, regular charging, load management, routine maintenance, temperature protection, and proper storage are key factors in ensuring optimal battery performance and longevity. Consider Star Plus tubular inverter batteries for their efficient performance and long-lasting service life. 

 

How to Get the Most from Your Star Plus Inverter Battery

 

Inverters have become the most crucial part of everyday life. Ever thought of spending your holiday without power? If that is the case, how about spending a workday without power? Those would be a nightmare. The digital world has made us more reliant on power and its urbanity. The battery manufacturers in Nigeria have made reliable power easier to access and affordable. The next noteworthy subject is getting the most from your inverter battery. This article covers the key tips that are not commonly known. Please read the article to make the most of your money spent.

 

Maintenance tips for inverter batteries:

Proper maintenance: 

Regular maintenance ensures the battery's longevity, and it is always best to check the health of the battery when it is fully charged. You should perform the examination when the battery is connected for at least 10-15 hours for charging.

A healthy battery should have a voltage reading close to its maximum voltage rating; thus, checking the voltage reading is vital.

We often confront the wear and tear problem that impacts the battery's life. Thus, it's good to inspect for any signs of wear and tear, such as corrosion or damage to the terminals. If any potential issue is found, you can decide it is time to replace the battery.

However, you must observe the battery's performance and see how long the battery holds its charge. If you find that it is not holding the charge as long as it should be, then probably, it's time to replace the battery. 

Frequent checks on the battery's health help in catching potential issues early and ensure performance optimally. If you are all set to buy an inverter in Lagos, look for their post-installment policies and how they assist with the maintenance and charges for the maintenance services. Very few people pay attention to the maintenance of these batteries. However, maintenance after their installment ensures the optimal functioning of batteries and helps cut down operating costs over time.

Clean the battery terminals regularly:

Inverter batteries excrete lead sulfate during their operation, and lead sulfate gets deposited on their terminals, which reduces the electrical conductivity of the inverter. If the condition prolongs, the battery becomes less efficient over time. Thus, the terminals have to be cleaned properly with warm water and a nylon brush.

Check the acid level regularly:

Batteries have two major components, lead, and acid. The float indicators of the battery depict the acid level inside the batteries and ensure the proper functioning of the inverters. The color of the acid also indicates the health of the inverter. If the acid comes out colorless after opening the vent, it is a good indication. 

Checking the acid level is crucial to maintain optimal performance, as the batteries rely on the acid to convert the stored energy to usable electric power. If the acid present in the batteries is not sufficient for the conversion or presents more than required, the batteries' ability to perform optimally is compromised.

A lower acid level means the lead plates are exposed to air, and that causes damage. Prolonged exposure to air leads the batteries to lose their capability to hold the charge or even fail. 

Battery Companies in Nigeria offer detailed manual and post-installment customer service to ensure these factors are checked thoroughly. Therefore taking their assistance enables you to operate the inverter batteries optimally. 

 

Power crisis in Nigeria getting worse:

A recent update about the country states that about 62% of the citizens, about 120 million people, lacked access to electricity!

Wikipedia states that about 55% of the Nigerian population experience power supply difficulties, whereas in some regions, the power supply is nearly non-existent. It also states that power supply problems have crippled agricultural, industrial, and mining sectors to a greater extent. The government could not utilize varied forms of energy due to the unavailability of oil in Nigeria and reliance on the expansion of the fossil fuel-burning sector. 

On the other hand, the dependency on hydroelectricity doesn't seem practical as well, as it is dependent on the seasons for the required amount of water supply. 

Furthermore, Nigeria is a tropical country, so it receives a lot of insolation from the sun. Thus the government, through the "Rural electrification project," is composed to supply solar systems to about 5 million households. 

Despite being one of the largest oil producers in the world, the country faces acute power shortages, frequent blackouts, and load shedding. Therefore experts consider Inverter batteries are reliable and affordable options to deliver power to all Nigerians.

Moreover, the inverter battery users must prioritize maintenance and clean for the extended and optimal performance of the inverter battery system.

Conclusion:

Inverters are like any other electrical device; they are designed to use regularly. Regular usage helps prevent the majority of malfunctions and damage to the device. When the electrical connections between the batteries and inverters are intact, the electrical problems will be at bay, and the efficiency of the system is also enhanced. When you are all set to install an inverter battery to your requirement, follow these tips.